Although I am a shade under 6 feet tall, I am somewhat short in the leg and long in the body. Combine this with the width of the GP800's seat, and I have often been left with one leg dangling when "paddling" in heavy traffic.
I have previously had a custom seat made for my R1100RS by Melvin Hunter and he was my first (and only) port of call for the GP800.
The R1100RS seat foam was simply "dished" slightly and a "gelastic" pad inserted - and a new custom cover was made. This time I was looking for as much lowering AND narrowing as possible - and the narrowing was more critical than the height.
One of the problems of having a seat conversion is the small matter of despatch. Not only do you have to pack a large seat (suitably protected), you have to get it to a post office and pay Postman Pat an inordinate amount of money to take it to Coventry. Then of course, you have to pay Melvin a similar amount of money to send back to you.
Something of a "result" presented itself to me when I realised how close to the NEC that Melvin was based - Once I knew I was attending this year's Motorcycle Expo (trade show) I arranged to drop the seat off on my way up - and Melvin agreed to provide a same day service and I collected the seat the same afternoon.
This timescale prevented the fabrication of a completely custom seat and cover like the R1100RS - but it did allow for a comprehensive re-shaping and "pulling" down of the existing cover together with the fitment of a "Gelastic" pad to provide additional comfort given the amount of padding which was removed.
These days, Melvin has handed over the fabrication to his son Ross and I am please to say that he has obviously handed down his skills efficiently as the job was clearly a top quality piece of craftsmanship. When I collected the seat, I did have an initial reaction of disappointment as it didn't seem as if anything had changed - but feeling the seat contours made me realise that the sides had been gently "scalloped" and the seat lowered very neatly and subtly.
Riding the bike with the new seat is excellent - although it doesn't seem much narrower, the combination of scalloped sides and reduced height means that I can have both feet flat on the floor - I am certain that once I'm back on the daily commute this will be a godsend in really heavy traffic.
It was only when taking the "after" picture and montaging it together with the "before" that I realised just what a comprehensive piece of work had been carried out. You can click on the image to see a larger version but the points to note are the significant reductions in "meat" above the solid plastic nose section as well as above the seam that follows the line of the riders leg. The narrowing is evidenced by the lack of a "ridge" along the lower edge of the seat base (much more obvious in the "before" picture by the shadow below).
Without having to pay for shipping, the cost was £95 including the gelastic pad. Worth it ? - I think so. Highly Recommended
You can find Ross and Melvin at http://www.motorbike-seats.co.uk and their website has an image gallery of some of their work.
